TO INSTALL SOCKET PLATE:

ALIGN ONE SIDE OF TABS (A) WITH SLOT AS SHOWN IN FIGURE 2.  PUSH INTO SLOT UNTIL TAB LOCKS SOCKET PLATE INTO POSITION.  REPEAT FOR OTHER SIDE OF SOCKET PLATE.  TEST BY FIRMLY PULLING SOCKET PLATE UP-WARD.

(RE)INSTALL REFLECTORS.

TO REMOVE SOCKET PLATE:

REMOVE REFLECTOR BY DISENGAGING FROM LOCKING TABS, AND SET OFF TO THE SIDE.

USE A FLAT BLADE SCREWDRIVER TO GENTLY DISENGAGE TAB LOCKING SOCKET PLATE INTO PLACE (SEE FIGURE 1.)  WHILE TAB IS DISENGAGED, FIRMLY PULL SOCKET PLATE UP-WARD FROM SLOT (A).  TAKE CARE NOT TO PULL TO FAR AS OTHER SIDE MAY BECOME DISTORTED AND DIFFICULT TO REINSTALL.  REPEAT FOR OTHER SIDE OF SOCKET PLATE.